Table of Contents

Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working

If you are looking for a reliable and tested flash file for your Samsung Clone J7 Core smartphone, you have come to the right place. In this article, we will share with you the download link and the manual flashing instructions for the Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working. This flash file will help you to fix various software issues on your Samsung Clone J7 Core device, such as bootloop, hang on logo, dead or bricked phone, network or IMEI problem, etc.

The Samsung Clone J7 Core is a clone or replica of the original Samsung Galaxy J7 smartphone. It has a 5.5-inch display, a Samsung Exynos 7 Octa 7870 chipset, a 13 MP rear camera, a 5 MP front camera, a 3000 mAh battery, and 16 GB of internal storage. The Samsung Clone J7 Core runs on Android 4.4.4 KitKat operating system and has a MT6582 MediaTek processor.

The Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working is a stock ROM that was extracted from a working device by using a professional tool called CM2. This flash file is compatible with SP Flash Tool and MTK USB Driver. You can use this flash file to restore your Samsung Clone J7 Core to its original factory settings or to update its software version.

How to Download and Flash Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working

Before you proceed with the flashing process, make sure that you have the following requirements:

• A PC or laptop with Windows setup.
• A USB data cable.
• A Samsung Clone J7 Core device with at least 45% of battery backup.
• A backup of your personal data and files.
• A Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working. You can download it from here [^1^] or here [^5^]. The file size is about 494 MB.
• An MTK USB Driver. You can download it from here.
• An SP Flash Tool. You can download it from here.

After you have downloaded and installed the MTK USB Driver and the SP Flash Tool on your PC or laptop, follow these steps to flash the Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working on your device:

1. Extract the Samsung Clone J7 Core Flash File MT6582 Firmware 1000% Tested Working zip file on your PC or laptop.
2. Open the SP Flash Tool folder and run the flash_tool.exe file as administrator.
3. Click on the Scatter-loading icon and select the MT6582_Android_scatter.txt file from the extracted flash file folder.
4. Wait for a few seconds for loading the firmware.
5. Press the Download button on the SP Flash Tool.
6. Turn off your Samsung Clone J7 Core device and remove the battery if possible.
7. Press and hold the boot key (volume up or volume down or both) if needed.
8. Connect your device to your PC or laptop via USB cable.
9. A green window will appear after flashing is completed.
10. Disconnect your device and reinsert the battery if removed.
11. Turn on your device and enjoy the new software version.

Congratulations! You have successfully flashed the Samsung Clone J7 Core Flash File MT6582