Table of Contents

Huawei DRA-LX2 Flash File Y5 Prime 2018 Sp Flash Tool DA Auth Fix Customer Care Firmware

If you are looking for a way to flash or install the stock firmware on your Huawei Y5 Prime 2018 DRA-LX2, then you are in the right place. In this article, we will show you how to use the SP Flash Tool to flash the official ROM on your device. This will help you fix any software issues, such as bootloop, stuck on logo, IMEI problem, or dead issue.

Before we proceed, let us tell you some important things about the Huawei DRA-LX2 flash file and the SP Flash Tool.

What is Huawei DRA-LX2 Flash File?

Huawei DRA-LX2 flash file is a file that contains the firmware or operating system of your Huawei Y5 Prime 2018 DRA-LX2. It is also known as stock ROM or stock firmware. It is the official software that comes pre-installed on your device when you buy it from the manufacturer or carrier.

Flashing or installing the Huawei DRA-LX2 flash file can help you restore your device to its original state and fix any software issues that may arise due to corruption, virus infection, or customization. It can also help you upgrade or downgrade your device’s firmware version.

What is SP Flash Tool?

SP Flash Tool is a software application that allows you to flash or install the firmware on devices that have Mediatek (MTK) chipsets. It is also known as Smartphone Flash Tool or MTK Flash Tool. It supports various formats of firmware files, such as scatter files, bin files, pac files, etc.

SP Flash Tool has many features, such as flashing stock ROM, custom ROM, recovery, memory test, parameter setting, format device, etc. It is compatible with Windows and Linux operating systems and requires a USB driver and a USB cable to connect your device to your PC.

How to Flash Huawei DRA-LX2 Flash File using SP Flash Tool?

To flash Huawei DRA-LX2 flash file using SP Flash Tool, you need to follow these steps:

1. Download and extract the Huawei DRA-LX2 flash file on your computer. You will get a zip package containing the firmware file, flash tool, USB driver, and how-to flash manual.
2. Download and install the USB driver on your computer. If the USB driver is already installed, then skip this step.
3. Download and extract the SP Flash Tool on your computer. You will get a folder containing the executable file and other files.
4. Run the SP Flash Tool as administrator and click on the “Choose” button under the “Scatter-loading File” section. Locate and select the scatter file from the firmware folder.
5. The SP Flash Tool will load the firmware details and display them on the screen. Make sure everything is correct and click on the “Download” button at the top.
6. Turn off your device and remove the battery if it is removable. Then connect your device to your PC via a USB cable while holding the volume up or volume down button.
7. The SP Flash Tool will detect your device and start flashing the firmware. Wait for the process to complete and do not disconnect or interrupt it.
8. Once the flashing is done, you will see a green tick mark on the screen. Disconnect your device and reboot it.
9. Congratulations! You have successfully flashed Huawei DRA-LX2 flash file using SP Flash Tool.

Note: If you encounter any error or issue while flashing, please refer to the how-to flash manual or contact us for assistance.

Conclusion

In this article, we have shown you how to flash Huawei DRA-LX2 flash file using SP Flash Tool. We hope this guide was helpful and easy to follow. If you have any questions or feedback, please feel free to leave a comment below.