Table of Contents

How to Download and Install Driver for Bolt Aquila Max 4G Modem

If you have a Bolt Aquila Max 4G modem, you might want to update its firmware to unlock it and use it with other operators. In this article, I will show you how to download and install the driver for Bolt Aquila Max 4G modem, as well as the firmware update file.

What is Bolt Aquila Max 4G Modem?

Bolt Aquila Max 4G modem is a wireless router that can provide high-speed internet access using the 4G TDD LTE network. It has a battery capacity of 3000 mAh, which can last up to 12 hours of video streaming or 180 hours of standby. It can share the internet connection with up to 31 devices simultaneously. It also has an intelligent screen that displays the battery status, internet quota, and wifi password.

Why Do You Need to Update the Firmware?

The original firmware of Bolt Aquila Max 4G modem is locked to the Bolt operator, which means you can only use it with a Bolt SIM card. However, if you want to use it with other operators, such as Smartfren or Telkomsel, you need to update the firmware to unlock it. The firmware update file is provided by Bolt officially, and it is compatible with the Aquila Max model (BL1).

How to Download and Install the Driver?

Before you can update the firmware, you need to download and install the driver for Bolt Aquila Max 4G modem on your computer. The driver is called Marvell WTPTP Wukong, and it is available here. Follow these steps to download and install the driver:

1. Click on the link above and download the file named Aquila-Software.zip.
2. Extract the zip file and open the folder.
3. Find the file that matches your operating system (Windows or Mac) and run it as administrator.
4. Follow the instructions on the screen to install the driver.
5. Restart your computer after the installation is complete.

How to Update the Firmware?

After you have installed the driver, you can proceed to update the firmware of your Bolt Aquila Max 4G modem. Follow these steps to update the firmware:

1. Remove the battery from your modem and connect it to your computer using a USB cable.
2. Open the folder where you extracted the Aquila-Software.zip file and run the file named Upgrade Tool.exe as administrator.
3. Select your modem model (BL1) and click on Start.
4. Wait until the upgrade process reaches 100% and do not disconnect your modem during this time.
5. After the upgrade is done, reconnect the battery to your modem and turn it on.
6. Open your web browser and go to http://192.168.1.1 to check the firmware version of your modem. It should be updated to BL1_V016.

Conclusion

In this article, I have shown you how to download and install the driver for Bolt Aquila Max 4G modem, as well as how to update its firmware to unlock it and use it with other operators. I hope this article was helpful for you. If you have any questions or feedback, please leave a comment below.